**Scalar and Vector Quantities**

Difference between Scalar and Vector Quantities

Distinguish between scalar and vector quantities

##### Scalar Quantities

##### Vector Quantities

acceleration, force, pressure, retardation, and momentum.

Addition of Vectors Using Graphical Method

Add vectors using graphical method

Scalar physical quantities have magnitude only. Thus, they can be added, multiplied, divided, or subtracted from each other.

Example 1

If you add a volume of 40cm

^{3}of water to a volume of 60cm^{3 }of water, then you will get 100cm^{3}of water.Vectors can be added, subtracted or multiplied conveniently with the help of a diagram.

Vectors Representation

A vector quantity can be represented on paper by a direct line segment.

- The length of the line segment represents the magnitude of a vector.
- The arrow head at the end represents the direction.

Methods of Vector Addition

There are two methods that are used to sum up two vectors:

- Triangle method
- Parallelogram method.

Triangle Method

A step-by-step method for applying the head-to-tail method to determine the sum of two or more vectors is given below.

1.Choose

a scale and indicate it on a sheet of paper. The best choice of scale

is one that will result in a diagram that is as large as possible, yet

fits on the sheet of paper.

a scale and indicate it on a sheet of paper. The best choice of scale

is one that will result in a diagram that is as large as possible, yet

fits on the sheet of paper.

2.Pick a starting location and draw the first vector

*to scale*in the indicated direction. Label the magnitude and direction of the scale on the diagram (e.g., SCALE: 1 cm = 20 m).3.Starting from where the head of the first vector ends, draw the second vector

*to scale*in the indicated direction. Label the magnitude and direction of this vector on the diagram.4.Draw the resultant from the tail of the first vector to the head of the last vector. Label this vector as

**Resultant**or simply**R**.5.

Using a ruler, measure the length of the resultant and determine its

magnitude by converting to real units using the scale (4.4 cm x 20 m/1

cm = 88 m).

Using a ruler, measure the length of the resultant and determine its

magnitude by converting to real units using the scale (4.4 cm x 20 m/1

cm = 88 m).

6.Measure the direction of the resultant using the counterclockwise convention.

**Resultant vector:**This

is the vector drawn from the starting point of the first vector to the

end point of the second vector which is the sum of two vectors.

Where:

- Vi – First vector
- V2 – Second vector
- R – Resultant vector

Example 2

Suppose a man walks starting from point A, a distance of 20m due North, and then 15m due East. Find his new position from A.

Solution

Use scale

1CM Represents 5m

Thus

20m due to North Indicates 4 cm

15m due to East Indicates 3cm.

Demonstration

The position of D is represented by Vector AD of magnitude 25M or 5CM at angle of 36

^{0}51”Since

- Tan Q = (Opposite /Adjacent)
- Tan Q = 3cm /4cm
- Q = Tan
^{ -1}(3/4) - Q = Tan
^{-1}(0.75) - Q = 35º51”

The Resultant displacement is 25m ad direction Q = 36º51”

The Triangle and Parallelogram Laws of Forces

State the triangle and parallelogram laws of forces

Triangle Law of Forces

Triangle

Law of Forces states that “If three forces are in equilibrium and two

of the forces are represented in magnitude and direction by two sides of

a triangle, then the third side of the triangle represents the third

force called resultant force.”

Law of Forces states that “If three forces are in equilibrium and two

of the forces are represented in magnitude and direction by two sides of

a triangle, then the third side of the triangle represents the third

force called resultant force.”

Example 3

A

block is pulled by a force of 4 N acting North wards and another force

3N acting North-East. Find resultant of these two forces.

block is pulled by a force of 4 N acting North wards and another force

3N acting North-East. Find resultant of these two forces.

Demonstration

Scale

**1**Cm Represents

**1**N

Draw a line AB of 4cm to the North. Then, starting from B, the top vectorofAB, draw a line BC of 3 CM at 45

^{o}East of North.Join

the line AC and measure the length (AC = 6.5 cm) which represents 6.5N.

Hence, AC is the Resultant force of two forces 3N and 4N.

the line AC and measure the length (AC = 6.5 cm) which represents 6.5N.

Hence, AC is the Resultant force of two forces 3N and 4N.

Parallelogram Method

In

this method, the two Vectors are drawn (usually to scale) with a common

starting point , If the lines representing the two vectors are made to

be sides of s parallelogram, then the sum of the two vectors will be the

diagonal of the parallelogram starting from the common point.

this method, the two Vectors are drawn (usually to scale) with a common

starting point , If the lines representing the two vectors are made to

be sides of s parallelogram, then the sum of the two vectors will be the

diagonal of the parallelogram starting from the common point.

The

Parallelogram Law states that “If two vectors are represented by the

two sides given and the inclined angle between them, then the resultant

of the two vectors will be represented by the diagonal from their common

point of parallelogram formed by the two vectors”.

Parallelogram Law states that “If two vectors are represented by the

two sides given and the inclined angle between them, then the resultant

of the two vectors will be represented by the diagonal from their common

point of parallelogram formed by the two vectors”.

Example 4

Two

forces AB and AD of magnitude 40N and 60N respectively, are pulling a

body on a horizontal table. If the two forces make an angle of 30

forces AB and AD of magnitude 40N and 60N respectively, are pulling a

body on a horizontal table. If the two forces make an angle of 30

^{o}between them find the resultant force on the body.Solutiuon

Choose a scale.

1cm represents10N

Draw a line AB of 4cm

Draw a line AD of 6cm.

Make an angle of 30

^{o }between AB and AD. Complete the parallelogram ABCD using the two sides AB and include angle 30^{O}.Draw the lineAC with a length of9.7 cm, which is equivalent to 97 N.

The lineAC of the parallelogram ABCD represents the resultant force of AB and AD in magnitude and direction.

Example 5

Two

ropes, one 3m long and the other and 6m long, are tied to the ceiling

and their free ends are pulled by a force of 100N. Find the tension in

each rope if they make an angle of 30

ropes, one 3m long and the other and 6m long, are tied to the ceiling

and their free ends are pulled by a force of 100N. Find the tension in

each rope if they make an angle of 30

^{o}between them.Solution

1cm represents 1N

Thus

3cm = represent 3m

6cm = represents 6m

Demonstration

By using parallelogram method

Tension, determined by parallelogram method, the length of diagonal using scale is 8.7 cm, which represents 100N force.

Thus.

Tension in 3m rope = 3 X 100 / 8.7 = 34.5N

Tension in 6m rope = 6 x 100 / 8.7 =69N

Tension force in 3m rope is 34.5N and in 6m rope is 69N.

*Note*:

**Equilibrant forces**are those that act on a body at rest and counteract the force pushing or pulling the body in the opposite direction.

**Relative Motion**

The Concept of Relative Motion

Explain the concept of relative motion

Relative motion is the motion of the body relative to the moving observer.

The Relative Velocity of two Bodies

Calculate the relative velocity of two bodies

**is the velocity relative to the moving observer.**

*Relative velocity**(Vr)*CASE

1: If a bus in overtaking another a passenger in the slower bus sees

the overtaking bus as moving with a very small velocity.

1: If a bus in overtaking another a passenger in the slower bus sees

the overtaking bus as moving with a very small velocity.

CASE 2: If the passenger was in a stationary bus, then the velocity of the overtaking bus would appear to be greater.

CASE 3: If the observer is not stationary, then to find the velocity of a body B relative to body A add velocity of B to A.

Example 6

If

velocity of body B is VB and that of body A is VA, then the velocity of

B with respect to A , the relative velocity VBA is Given by:

velocity of body B is VB and that of body A is VA, then the velocity of

B with respect to A , the relative velocity VBA is Given by:

VBA = VB + (-VA)

That is

VBA = VB – VA

NOTE:The relative velocity can be obtained Graphically by applying the Triangle or parallelogram method.

For same direction

VrBA = VB – (+VA)

= VB – VA ___________________ (I)

For different direction

VrBA = VB – (-VA)

VrBA = VB + VA _______________________ (II)

Example 7

A

man is swimming at 20 m/s across a river which is flowing at 10 m/s.

Find the resultant velocity of the man and his course if the man

attempted to swim perpendicular to the water current.

man is swimming at 20 m/s across a river which is flowing at 10 m/s.

Find the resultant velocity of the man and his course if the man

attempted to swim perpendicular to the water current.

Solution

Scale

1cmrepresents 2m/s

- The length of AC is 11.25 cm which is 22.5 m/s making a angle of 65º25’ with the water current.
- The diagonal AC represent (in magnitude and direction) the resultant velocity of the man.

The Concept of Relative Motion in Daily Life

Apply the concept of relative motion in daily life

Knowledge

of relative motion is applied in many areas. In the Doppler effect, the

received frequency depends on the relative velocity between the source

and receiver. Friction force is determined by the relative motion

between the surfaces in contact. Relative motions of the planets around

the Sun cause the outer planets to appear as if they are moving

backwards relative to stars in universe.

of relative motion is applied in many areas. In the Doppler effect, the

received frequency depends on the relative velocity between the source

and receiver. Friction force is determined by the relative motion

between the surfaces in contact. Relative motions of the planets around

the Sun cause the outer planets to appear as if they are moving

backwards relative to stars in universe.

**Resolution of Vectors**

The Concept of Components of a Vector

Explain the concept of components of a vector

Is

the Splits or separates single vector into two vectors (component

vectors) which when compounded, provides the resolved vector.

the Splits or separates single vector into two vectors (component

vectors) which when compounded, provides the resolved vector.

**Resolved vector**is asingle vector which can be split up into component vectors.

**Component vectors**are vectors obtained after spliting up or dividing a single vector.

Resolution of a Vector into two Perpendicular Components

Resolve a vector into two perpendicular components

Components of a vector are divided into two parts:

- Horizontal component
- Vertical component

Take angle OAC

Case 1

SinQ = FX/F

Thus

FX = F SinQ

Horizontal component, FX = FSinQ

Case 2

Cos Q = Fy/F

Thus:

Fy = FCosQ

Vertical component: Fy = FCosQ

Resolution of Vectors in Solving Problems

Apply resolution of vectors in solving problems

Example 8

Find the horizontal and vertical components of a force of 10N acting at 30

^{0}to the vertical.Solution

FX = FCOS 60º

Since

Cos 60º /F =(FX)

FX = F CoS60º _________________(1)

FX = 10NCos 60º

Fy = ?

Sinq = Fy

Fy =F SinQ __________________________ (ii)

Fy= 10N Sin 60º

It’s difficult to find experienced people in this particular subject,

however, you sound like you know what you’re talking about!

Thanks

Hello, i read your blog occasionally and i own a similar one

and i was just curious if you get a lot of spam comments?

If so how do you reduce it, any plugin or anything you can suggest?

I get so much lately it’s driving me insane so any assistance is very much appreciated.

I got this website from my friend who told me regarding this site and now this time I

am browsing this web page and reading very informative articles here.

We are a group of volunteers and starting a new scheme in our community.

Your site provided us with valuable info to work on. You have done an impressive job and our whole community will be thankful to you.

I love what you guys are usually up too. This sort of clever work and exposure!

Keep up the terrific works guys I’ve incorporated you guys to my personal blogroll.

Hello, for all time i used to check website posts here in the early hours in the dawn, as i like to learn more and more.

Hey I know this is off topic but I was wondering if you knew of any widgets I could add to my blog that automatically tweet my newest twitter updates.

I’ve been looking for a plug-in like this for

quite some time and was hoping maybe you would have some

experience with something like this. Please let me know if you run into anything.

I truly enjoy reading your blog and I look forward to your new updates.

Hey! Quick question that’s totally off topic. Do you know how to make your site mobile friendly?

My blog looks weird when browsing from my apple iphone.

I’m trying to find a template or plugin that might be able

to correct this problem. If you have any recommendations, please share.

Cheers!

What a information of un-ambiguity and preserveness of precious experience concerning unexpected feelings.

Unquestionably believe that that you stated. Your favourite reason seemed to be at the internet the simplest factor to be aware of. I say to you, I definitely get annoyed whilst folks think about worries that they plainly don’t recognize about. You managed to hit the nail upon the top and also outlined out the entire thing without having side effect , people could take a signal. Will probably be again to get more. Thanks

free dating sites

At this moment I am ready to do my breakfast, later than having my breakfast coming over again to read

additional news. free dating sites

scoliosis

This post provides clear idea in favor of the new visitors of blogging, that actually how to do blogging.

scoliosis